• 4 Channels Depending on the model, the Vertex HFC converts RF ranges between 0.75GHz and 6GHz to mmWave ranges between 5.9GHz and 40.5GHz and vice versa, allowing channel characteristic simulation in millimeter band scenarios required for 5G implementation.  It can also be customized to support other mmWave frequencies.

C100-M4 – provides unprecedented performance resulting from Spirent’s multi-core architecture with new hardware-assisted application, mobility and encryption acceleration. Nodal testing – wrap around individual network elements Scales up to: 50,000 gNBs -> and 5,000,000 5G UEs -> and 50,000,000 Diameter UEs E10 – is a small form factor test platform that supports applications for benchtop, lab and distributed testing of Mobile and Wi-Fi networks. Scales up to: 64 Wi-Fi Clients -> and 1,000 5G UEs

Enhance the realism of lab-based wireless testing and automate standards-based test plans.

• 3GPP-compliant NR L1-L3 for protocol design/protocol testing • 3GPP-compliant RF waveform for RF design/testing • Carrier BW: 5, 10, 15, 20, 60, 80, 100MHz • Sub-Carrier Spacing: 15, 30kHz

User Experience Evaluation for Video, Data and Voice; assure a quality video, data and voice experience on any device, operating system, or network.

• Modular architecture • Scalable from 2×2 up to 16×16 • Freq Range: 380MHz to 3.85GHz • Low end extension down to 30MHz • High end extension up to 5.95GHz • Channel BW: 40MHz • Options 100, 200, 400, 600, 800, 1000 and 1200MHz • Doppler Shift: ± 4kHz • Options ± 12kHz and ± 1.95MHz • Delay 4msec • Option 2sec (40MHz) / 1sec (>40MHz)

• ADS-B equipment installation verification • Complete AC 20-165B fast and convenient reporting to identify installation issues • STC support • Eliminate post STC operational flights • Coupled testing in the hangar or on the flight line, eliminates: • Open sky requirements • GPS repeater • Weather issues • Interference with ATC operations • Saves time and money

• Tests FMCW radio altimeters including CDF types • Tests pulse radio altimeters (non-pulse compression types) • Direct-connect to UUT T/R or to installed system via antenna couplers • Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified • Multi-channel operation (via additional test sets) • Programmable multi-leg climb/descend profiles • Large touch-screen display with simple user interface • Remote control interface USB/LAN • Lightweight and compact about 10 lbs. (4.5 kg) • Battery 4 hours plus duration

• Fiber optic delay line based test set supports all formats of radio altimeters • Portable ruggedized enclosure for flight line or benchtop use • Battery operated • Simulates static altitudes from 5* ft. to 10,000 ft. in 5 ft. increments (*Minimum altitude dependent on interconnecting cables) • Extended Range Option: Simulate 16,000 ft and 25,000 ft as discrete altitude selections • +20 dB of power level offset from nominal loop loss value • Touch-screen operation • Direct-connect to UUT T/R or installed system via antenna couplers

• DoD AIMS 03-1000A (Change Notes 1,2,3) Mark XIIA certified • Supports DoD AIMS 04-900A Option A - KIV-78 and Option B - KIV-77, & SIT-2010 crypto appliqués. • Transponder Test Modes 1,2,3/A, C, S (EHS/ELS), 4, Mode 5 (Level 1 and 2 • Interrogator Test Modes 1, 2, 3/A, C, S, 4, Mode 5, TCAS, ETCAS (Level 1 and 2) • DO-260B compliant; ADS-B Out test capability

• Legacy command set compatibility offered for the following products: NAV-2000R, ATN-7300 and the Collins 479S-6A • Ethernet remote control interface offered on the ATB-7300NG • VHF Generator - Provides control of modulation frequency, modulation depth (up to 3 sources), SELCAL tones, frequency and tone sequences. • ILS/Localizer Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, left/right DDM and IDENT settings, including Morse code. • ILS Glide Slope Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, up/down DDM

• Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes • ADS-B Target Generator • ADS-B squitter encode/decode • DO-260, DO-260A and DO-260B data parsing • DO-260B canned tests available (option) • Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option) • UAT TX/RX capability (optional) • Pulse and frequency measurement • 10.4 inch touch screen LCD display for operator control of all test set capabilities • Remote controlled via GPIB or Ethernet • Two independent transmitters and receivers • TX/RX data logging capability • Full diversity testing capability