SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - IFF-45TS MK XIIA/TACAN Bench Test Set
- • MK XIIA AIMS certified for Level 1 and Level 2
- • Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
- • Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
- • Separate connections for direct or over-the-air testing
- • Software defined radio design allows waveform flexibility and future growth potential
- • Dual signal generator design allows coordinated signal production for interference and echo testing
- • Remote interfaces consist of RS-232, Ethernet and GPIB
- • GUI allows easy access to test features
- • Industry wide use in development and end item testing of transponders and interrogators
A leading edge RF signal generator designed for engineering, manufacturing and return-to-service applications
Provides RF signal generation and parametric measurement of MK XIIA and TACAN equipment
The IFF-45TS Transponder / Interrogator / TACAN Bench Test Set is an RF signal simulator that provides support for AIMS Mark XIIA transponders and interrogators. It operates under remote control from a computer or ATE system and provides versatile signal generation and measurement capability of Mark XIIA system signals in bench and over-the-air applications.
Replies and interrogations can be individually configured to support testing requirements. ADS-B Out testing monitors ADS-B, TIS-B, ADS-R and Acquisition squitters. The IFF-45TS emulates either a TACAN ground transponder or a TACAN airborne interrogator, providing six TACAN test modes
EXPORT CONTROL
This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.
Applications
- • Engineering – Development and qualification testing for MK XIIA, ADS-B Beacon, and TACAN equipment
- • Manufacturing - factory calibration and verification testing
- • Depot/Service - Level 1/2, return-toservice testing
- • Support for DO-260B, AIMS 03-1000B, Amendment 1 and DO-181E certification testing
- • Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators
- • Industry-wide use for development and end item testing of transponders and interrogators
More Product Information
- • Legacy command set compatibility offered for the following products: NAV-2000R, ATN-7300 and the Collins 479S-6A
- • Ethernet remote control interface offered on the ATB-7300NG
- • VHF Generator - Provides control of modulation frequency, modulation depth (up to 3 sources), SELCAL tones, frequency and tone sequences.
- • ILS/Localizer Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, left/right DDM and IDENT settings, including Morse code.
- • ILS Glide Slope Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, up/down DDM
- • VOR Generator - Provides control of 30 Hz Var/Ref and 9960 Hz tone frequencies, modulation depths, 9960 Hz deviation, VOR bearing, to/from and IDENT settings
- • ADF Generator - Provides control of modulation frequency, modulation depth and IDENT settings
- • Marker/Beacon Generator - Provides selection of Outer, Middle and Inner marker beacon tones and control of tone frequencies, modulation depth and IDENT settings
- • Basic Graphical User Interface (GUI) allows access to test features
• Global Avionics Test Set Support
• Fully Self-Contained
• Static and Dynamic simulations
• Automated Almanac upload process
• 18-channel configuration
• Real-time Transcoding
• Remote control interface via mobile application for both iOS and Android devices
• Single or Dual Coupler Configurations
• GPS signals simulated: L1
• Two independent receivers and two transmitters in each unit.
• Transmit and receive frequency range of 1 MHz to 18 GHz.
• Up to 400 MHz instantaneous signal bandwidth on each transmitter and receiver.
• Each receiver is independently programmable in frequency, gain, and bandwidth.
• Each transmitter is independently programmable in frequency, power, and signal waveform.
• Large waveform storage capacity for full bandwidth recording and playback.
• Quick setup and configuration, operational in a matter of minutes.
• Compatible with standard universal AC power, vehicle power, and battery power.
• BB2590 battery operation for extended field use.
• Compatible with Ranger Signal WorkShop™ waveform files.
• Compatible with Ranger EMS Sequencer (Vignette Planning & Execution) software.
• Mobile phone, tablet, or PC operation via network connection.
• Modular hardware structure for customizable configurations.
• Software Communications Architecture (SCA) framework for rapid deployment of new features and applications.
• Open modular architecture for easy integration into various platforms and systems
- • Safe and precise measurement and simulation
- • Contaminated Probe Detection
- • Low Voltage / Low Current Mode - Isolates corroded connections.
- • Distance-to-Fault Measurement
- • Self-test on power up
- • Closed box calibration
- • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
- • Modular design for high reliability and low maintenance
- • Closed box calibration using front panel controls - performed annually
- • Battery powered with percent of charge displayed
- • Maintenance codes displayed to aid in troubleshooting
- • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
- • Large selection of aircraft specific interface cables readily available
- • Very short event dead zones (20cm) and attenuation dead zones (40cm)
- • Streamlined user interface and error-free set-up
- • FastReport on-board PDF report generation
All features from the existing IFF-45TS will be carried over, including:
- • Mode 5 testing without actual cryptographic applique and keys using integral mode 5 emulator
- • Supports DoD AIMS 04-900A Option A - KIV-78 and QRTK6 NG (with Airbus DS QRTK6 NG adapter) and Option B - KIV-77 and SIT-2010 crypto appliqués, KIV-79
- • Separate connections for direct or over-the-air testing
- • Test ranges of up to 3 km with appropriate antennas
- • ADS-B Out
- • Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators
- • Repeatable Pass/Fail analysis eliminates subjective guesswork from the measurement process
- • User-selectable acceptance profiles allow certification to any acceptance criteria
- • Includes FiberChekPRO™ software for analysis and reporting with PC/laptop
- • Automatic Image Centering ensures the fiber in always on the center of the screen
- • Dual-Magnification switching allows easy toggling between low & high magnifications.in both live and analysis views
- • Easily connect to a T-BERD®/MTS-2000/4000/5800/6000A/8000v2, HST-3000, SMARTClassTM Fiber, Certifier40G, DSAM and CellAdvisor via USB without the need for any additional adapters or software.
- • Easily connect to mobile Android™ devices/tablets using FiberChekMOBILE (available at Google Play) to inspect endface quality, measure optical power, and certify fiber connectors to industry standards directly on the mobile device
- • MK XIIA AIMS certified for Level 1 and Level 2
- • Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
- • Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
- • Separate connections for direct or over-the-air testing
- • Software defined radio design allows waveform flexibility and future growth potential
- • Dual signal generator design allows coordinated signal production for interference and echo testing
- • Remote interfaces consist of RS-232, Ethernet and GPIB
- • GUI allows easy access to test features
- • Industry wide use in development and end item testing of transponders and interrogators
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
