SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - T/Rx Software Defined Transceiver System
• Two independent receivers and two transmitters in each unit.
• Transmit and receive frequency range of 1 MHz to 18 GHz.
• Up to 400 MHz instantaneous signal bandwidth on each transmitter and receiver.
• Each receiver is independently programmable in frequency, gain, and bandwidth.
• Each transmitter is independently programmable in frequency, power, and signal waveform.
• Large waveform storage capacity for full bandwidth recording and playback.
• Quick setup and configuration, operational in a matter of minutes.
• Compatible with standard universal AC power, vehicle power, and battery power.
• BB2590 battery operation for extended field use.
• Compatible with Ranger Signal WorkShop™ waveform files.
• Compatible with Ranger EMS Sequencer (Vignette Planning & Execution) software.
• Mobile phone, tablet, or PC operation via network connection.
• Modular hardware structure for customizable configurations.
• Software Communications Architecture (SCA) framework for rapid deployment of new features and applications.
• Open modular architecture for easy integration into various platforms and systems
Compact, rugged, all-weather solution for understanding and controlling the Electromagnetic Spectrum (EMS).
The VIAVI Solutions T/Rx is a Software Defined Transceiver (SDT) system that monitors, analyzes, records, and transmits Radio Frequency (RF) signals, providing capabilities needed to thoroughly understand and accurately replicate the Electromagnetic Spectrum (EMS). T/Rx is a compact, rugged, all-weather transmitter/receiver platform that can be installed in a building structure, tower, backpack, vehicle, drone, or unmanned remote location. With its small size, modular design, and optional battery power, the T/Rx is well suited for both fixed installations and remote operation away from fixed installation sites. T/Rx is a network-enabled platform, allowing for command and control from any device on the network as well as collaboration between units. T/Rx SDT system performance and capabilities go above and beyond functionality found in typical, low-cost, low performance, Software Defined Radio (SDR) products. T/Rx SDT provides high performance RF combined with high-horsepower processing, eliminating RF artifacts and enabling advanced capabilities for critical applications where high fidelity, accuracy, wide bandwidth, and real-time capabilities are essential.
The T/Rx complements the Ranger system by providing a remote device that extends the Ranger's transmit, receive, and record capabilities to harsh environments and remote locations. T/Rx and Ranger share the same waveform file format, allowing files to be transferred between platforms over the network. Recordings and synthetic waveforms created on a Ranger and be transferred to T/Rx units to playback into the EMS. Recordings from remote locations, collected with T/Rx units, and be transferred to Ranger units for analysis and processing. Multiple T/Rx units can be used to create a realistic and dynamic simulated EMS environments and large-scale distributed monitoring capabilities. Both the Ranger and T/Rx platforms can be automated using the VIAVI EMS Sequencer software, allowing users to create transmit and receive scenarios that can be performed automatically and remotely. When used together, these VIAVI products provide a comprehensive capability to understand and control the EMS.
Applications
• Electromagnetic Environment Characterization and Simulation
• Sensors and Emitters for Test, Validation, and Training Ranges
• Commercial and Public Infrastructure Protection
• Electronic Warfare (EW) - Electronic Support (ES), Electronic Protection (EP), Electronic Attack (EA)
• Signal Intelligence (SIGINT) - Communications Intelligence (COMINT), Electronics Intelligence (ELINT)
• Multi Domain Operations (MDO)
• Customized RF Transmitter/Receiver Applications
More Product Information
- • Fiber optic delay line based test set supports all formats of radio altimeters
- • Portable ruggedized enclosure for flight line or benchtop use
- • Battery operated
- • Simulates static altitudes from 5* ft. to 10,000 ft. in 5 ft. increments (*Minimum altitude dependent on interconnecting cables)
- • Extended Range Option: Simulate 16,000 ft and 25,000 ft as discrete altitude selections
- • +20 dB of power level offset from nominal loop loss value
- • Touch-screen operation
- • Direct-connect to UUT T/R or installed system via antenna couplers
- • Very short event dead zones (20cm) and attenuation dead zones (40cm)
- • Streamlined user interface and error-free set-up
- • FastReport on-board PDF report generation
- • System - Simulated 3D position may be user entered in latitude/longitude/height format or 3D position may be dynamically simulated utilizing a multi-leg waypoint entry scheme. An unlimited number of navigation plans may be saved and recalled under a user assigned name. A built-in GPS receiver allows positional simulation in the form of a range, heading and altitude based on current test set position.
- • Satellite Vehicle (SV) Selection - All GPSG-1000 configurations allow GPS and Galileo satellites to be mixed. (The Galileo codes may be updated via a text file upload.)
- • Waypoints - Waypoint legs join up in 3D space, with either range rate or altitude-rate being auto calculated. Trajectory changes are calculated to simulate real world navigation, i.e. waypoint leg heading changes utilize realistic rates of turn; altitude changes utilize realistic rates of descent or climb. Way points may be entered in LAT/LONG form or automatically recalled from an airport or city database.
- • SBAS - SBAS satellites WAAS/EGNOS may be manually selected or automatically based on simulated position.
- • Setup - The setup page allows system, user and RF connection parameters to be set by the user.
VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units. Combined with a VIAVI Fuel Quantity Test Set, the test solution provides complete functional testing and troubleshooting of the fuel quantity system. If you are unable to find your aircraft listed here, we also offer design services for the development of new interfaces and aircraft test procedures.
Available through your GSA Supplier
- • VIAVI designed RF test system, fully integrated into the ATEC® Test System
- • Simple Ethernet interface between RFEM and ATEC® Test System permits easy retrofit to existing ATE installations
- • Powerful test executive interface offers many advantages to the test operator
- • Global service and support provided jointly by SPHEREA and VIAVI Solutions
- • Extensive CMM-listed TPS library in development or planned, covering Nav, Comm, TCAS, Transponder, GPS, and other RF systems
- • Complete RFEM and TPS information can be consulted on the SPHEREA Customer Support and Services MySpherea Internet web site
- • Our objective is to offer test coverage of RF products from all major OEMs
- • Legacy command set compatibility offered for the following products: NAV-2000R, ATN-7300 and the Collins 479S-6A
- • Ethernet remote control interface offered on the ATB-7300NG
- • VHF Generator - Provides control of modulation frequency, modulation depth (up to 3 sources), SELCAL tones, frequency and tone sequences.
- • ILS/Localizer Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, left/right DDM and IDENT settings, including Morse code.
- • ILS Glide Slope Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, up/down DDM
- • VOR Generator - Provides control of 30 Hz Var/Ref and 9960 Hz tone frequencies, modulation depths, 9960 Hz deviation, VOR bearing, to/from and IDENT settings
- • ADF Generator - Provides control of modulation frequency, modulation depth and IDENT settings
- • Marker/Beacon Generator - Provides selection of Outer, Middle and Inner marker beacon tones and control of tone frequencies, modulation depth and IDENT settings
- • Basic Graphical User Interface (GUI) allows access to test features
- • IFF Modes 1 & 2
- • TACAN/DME interrogator testing
- • Military E-TCAS
- • Transponder Auto Test (DO-181E)
- • Automated ADS-B AC 20-165B surface/air performance testing
- • ADS-B (Out) monitor and decode
- • ADS-B (In) target generation
- • UUT parametric tests
- • User programmable TCAS scenarios
- • Altitude encoder
- • Over-the-air, direct, or coupled testing
- • Battery operation for 6 hours plus
- • Configurable test capability
- • Intuitive user interface
- • Software defined applications
- • Remote operation
- • Android™ and iOS® compatible
- • Guided test for Navigation applications
- • Built-in GPS Receiver
- • International test configurations
- • DoD AIMS 03-1000A (Change Notes 1,2,3) Mark XIIA certified
- • Supports DoD AIMS 04-900A Option A - KIV-78 and Option B - KIV-77, & SIT-2010 crypto appliqués.
- • Transponder Test Modes 1,2,3/A, C, S (EHS/ELS), 4, Mode 5 (Level 1 and 2
- • Interrogator Test Modes 1, 2, 3/A, C, S, 4, Mode 5, TCAS, ETCAS (Level 1 and 2)
- • DO-260B compliant; ADS-B Out test capability
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
