• • Wide bandwidth, massive recording memory depth with contiguous and sequential recording and playback modes 
• • Capable of more than three hours of streaming capture or play back at full instantaneous bandwidth (IBW) (max IBW is 200 MHz) at any center frequency between 100 kHz to 6 GHz or 30 GHz, depending on optional hardware configurations. 
• • Capture, playback, and analyze the electromagnetic spectrum (EMS), including both military radars and 5G signals. 
• • Ranger’s open industry standard based modular construction supports single or multiple channels in a single 6U chassis, as well as optional high-speed memory depths for recording and playback. 
• • Frequency Range 
• • VSG: 100 kHz to 6 GHz 
• • VSA: 100 kHz to 6 GHz, 100 kHz to 30 GHz (based on hardware configuration) 
• • Instantaneous Bandwidth (IBW) up to 200 MHz (250M samples / sec) 
• • Signal WorkShop™ Signal Analysis Suite is integrated in all Ranger systems; provides extensive frequency-selective modulation-domain analysis tools to help users pinpoint and isolate signals and identify the cause of RF issues. 
• • Compact design, 4U x 19” rack-mountable chassis 
• • Rugged construction, 30 G Shock, MIL-28800 Class 3 
• • Modular design to adapt to ever-changing needs and allow for system sanitization

• • Safe and precise measurement and simulation
• • Contaminated Probe Detection
• • Low Voltage / Low Current Mode - Isolates corroded connections.
• • Distance-to-Fault Measurement
• • Self-test on power up
• • Closed box calibration

• • Repeatable Pass/Fail analysis eliminates subjective guesswork from the measurement process 
• • User-selectable acceptance profiles allow certification to any acceptance criteria 
• • Includes FiberChekPRO™ software for analysis and reporting with PC/laptop 
• • Automatic Image Centering ensures the fiber in always on the center of the screen 
• • Dual-Magnification switching allows easy toggling between low & high magnifications.in both live and analysis views 
• • Easily connect to a T-BERD®/MTS-2000/4000/5800/6000A/8000v2, HST-3000, SMARTClassTM Fiber, Certifier40G, DSAM and CellAdvisor via USB without the need for any additional adapters or software. 
• • Easily connect to mobile Android™ devices/tablets using FiberChekMOBILE (available at Google Play) to inspect endface quality, measure optical power, and certify fiber connectors to industry standards directly on the mobile device

• • Accommodates both phase and amplitude type antennas
• • Reliable, FAR Part 43, Appendix F, ERP and MTL testing in high multi-path environments
• • Provides >20 dB of isolation
• • Provides shielding for all transponder and ADS-B performance testing
• • Lower antenna adjustable support pole
• • Perform four-quadrant testing by simply rotating the bearing selector dial
• • TCAS bearing accuracy < 10 degrees

• • Very short event dead zones (20cm) and attenuation dead zones (40cm)
• • Streamlined user interface and error-free set-up
• • FastReport on-board PDF report generation

• • Integrated touch screen with live fiber viewing
• • Auto-Center
• • Auto-Focus
• • Built-in fiber endface analysis
• • User-selectable acceptance profiles
• • Stores results on device or export
• • WiFi and USB connection capabilities

All features from the existing IFF-45TS will be carried over, including:

• • Mode 5 testing without actual cryptographic applique and keys using integral mode 5 emulator
• • Supports DoD AIMS 04-900A Option A - KIV-78 and QRTK6 NG (with Airbus DS QRTK6 NG adapter) and Option B - KIV-77 and SIT-2010 crypto appliqués, KIV-79
• • Separate connections for direct or over-the-air testing
• • Test ranges of up to 3 km with appropriate antennas 
• • ADS-B Out 
• • Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators

• • Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
• • Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
• • Reduces interference with air traffic control and nearby aircraft
• • Rugged design for ramp use
• • Fits most ‘Shark Fin’ L-Band antennas
• • Quick action antenna grip/release action

• • System - Simulated 3D position may be user entered in latitude/longitude/height format or 3D position may be dynamically simulated utilizing a multi-leg waypoint entry scheme. An unlimited number of navigation plans may be saved and recalled under a user assigned name. A built-in GPS receiver allows positional simulation in the form of a range, heading and altitude based on current test set position.
• • Satellite Vehicle (SV) Selection - All GPSG-1000 configurations allow GPS and Galileo satellites to be mixed. (The Galileo codes may be updated via a text file upload.)
• • Waypoints - Waypoint legs join up in 3D space, with either range rate or altitude-rate being auto calculated. Trajectory changes are calculated to simulate real world navigation, i.e. waypoint leg heading changes utilize realistic rates of turn; altitude changes utilize realistic rates of descent or climb. Way points may be entered in LAT/LONG form or automatically recalled from an airport or city database.
• • SBAS - SBAS satellites WAAS/EGNOS may be manually selected or automatically based on simulated position.
• • Setup - The setup page allows system, user and RF connection parameters to be set by the user.