Products
- Legacy command set compatibility offered for the following products: NAV-2000R, ATN-7300 and the Collins 479S-6A
- Ethernet remote control interface offered on the ATB-7300NG
- VHF Generator - Provides control of modulation frequency, modulation depth (up to 3 sources), SELCAL tones, frequency and tone sequences.
- ILS/Localizer Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, left/right DDM and IDENT settings, including Morse code.
- ILS Glide Slope Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, up/down DDM
- VOR Generator - Provides control of 30 Hz Var/Ref and 9960 Hz tone frequencies, modulation depths, 9960 Hz deviation, VOR bearing, to/from and IDENT settings
- ADF Generator - Provides control of modulation frequency, modulation depth and IDENT settings
- Marker/Beacon Generator - Provides selection of Outer, Middle and Inner marker beacon tones and control of tone frequencies, modulation depth and IDENT settings
- Basic Graphical User Interface (GUI) allows access to test features
- Wide bandwidth, massive recording memory depth with contiguous and sequential recording and playback modes
- Capable of more than three hours of streaming capture or play back at full instantaneous bandwidth (IBW) (max IBW is 200 MHz) at any center frequency between 100 kHz to 6 GHz or 30 GHz, depending on optional hardware configurations.
- Capture, playback, and analyze the electromagnetic spectrum (EMS), including both military radars and 5G signals.
- Ranger’s open industry standard based modular construction supports single or multiple channels in a single 6U chassis, as well as optional high-speed memory depths for recording and playback.
- Frequency Range
- VSG: 100 kHz to 6 GHz
- VSA: 100 kHz to 6 GHz, 100 kHz to 30 GHz (based on hardware configuration)
- Instantaneous Bandwidth (IBW) up to 200 MHz (250M samples / sec)
- Signal WorkShop™ Signal Analysis Suite is integrated in all Ranger systems; provides extensive frequency-selective modulation-domain analysis tools to help users pinpoint and isolate signals and identify the cause of RF issues.
- Compact design, 4U x 19” rack-mountable chassis
- Rugged construction, 30 G Shock, MIL-28800 Class 3
- Modular design to adapt to ever-changing needs and allow for system sanitization
• Two independent receivers and two transmitters in each unit.
• Transmit and receive frequency range of 1 MHz to 18 GHz.
• Up to 400 MHz instantaneous signal bandwidth on each transmitter and receiver.
• Each receiver is independently programmable in frequency, gain, and bandwidth.
• Each transmitter is independently programmable in frequency, power, and signal waveform.
• Large waveform storage capacity for full bandwidth recording and playback.
• Quick setup and configuration, operational in a matter of minutes.
• Compatible with standard universal AC power, vehicle power, and battery power.
• BB2590 battery operation for extended field use.
• Compatible with Ranger Signal WorkShop™ waveform files.
• Compatible with Ranger EMS Sequencer (Vignette Planning & Execution) software.
• Mobile phone, tablet, or PC operation via network connection.
• Modular hardware structure for customizable configurations.
• Software Communications Architecture (SCA) framework for rapid deployment of new features and applications.
• Open modular architecture for easy integration into various platforms and systems