SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - CleanBlastPRO Automated Fiber End-Face Cleaning System
- • Uses a precise non-contact air-solvent-air sequence to blast and remove contamination particles
- • Comprehensive selection of precision cleaning tips for most fiber connector types
- • High performance air filter system
- • Hassle-free solvent management
- • Additional connections for foot activation pedal & backplane handset extension.
CleanBlastPRO™ is VIAVI's newest automated fiber end-face cleaning system, designed for seamless deployment by component and connectivity manufacturers and integrators. It ensures clean fiber connectors across production facilities.
CleanBlastPRO is the latest automated fiber end-face cleaning system from VIAVI Solutions. Based on the original concept from its predecessor, the CleanBlastPRO has been redesigned from the ground up to deliver all the benefits of the original CleanBlast while adding improvements where they matter most. The result is a system that connectivity manufacturers can easily deploy throughout their production facilities to ensure clean fiber connectors.
Benefits
- • Ensure clean fiber end-faces for every connector type
- • Streamline cleaning workflows in production environments with fast cleaning cycles
- • Automate connector cleaning at the push of a button
- • Remove, rather than spread or embed, loose debris from end faces
Applications
- • Optical component production environments
- • Cable assembly contract manufacturing
Document
More Product Information
- • Integrated touch screen with live fiber viewing
- • Auto-Center
- • Auto-Focus
- • Built-in fiber endface analysis
- • User-selectable acceptance profiles
- • Stores results on device or export
- • WiFi and USB connection capabilities
- • Easy to operate/calibrate
- • Annual calibration Lightweight / portable
- • Rechargeable battery or externally powered
- • Percent of battery capacity displayed
- • Self-test on power-up
- • Measures DC voltage Manual or Auto Ranging
- • 2 and 3 Wire Meggar
- • Compliant with Boeing Spec 10-61959 Rev H
- • MIL-STD-810 Method 511.4 certified
- • Traceable to NIST
- • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
- • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
- • TCAS and ADS-B Target Generator
- • Simulates 32 dynamic and 568 static ADS-B/TCAS targets at 1090 MHz in scenario mode
- • Simulates 32 dynamic and 1,500 static UAT targets at 978 MHz as airborne or ground link messages 1
- • Simulates blocks of up to 1,000 messages for Ground Station and TCAS messages at 1030 MHz 2
- • ADS-B squitter encode/decode
- • More test capability than any tester in the market, all packed into one box
- • Pulse and frequency measurement Transponder test option for Modes A, C, S
- • Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
- • 10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
- • Four port antenna simulation
- • Hybrid surveillance
- • Six independent transmitters and two receivers
- • Data parsing for analysis
1Requires RGSNGOPT10 Transponder, RGSNGOPT14 Multi-receiver, or RGSNGOPT13 UAT options
2Requires RGSNGOPT14 Multi-receiver
- • Configurable test capability
- • Intuitive user interface
- • Software defined applications
- • Remote operation
- • Android™ and iOS® compatible
- • Guided test for Navigation applications
- • Built-in GPS Receiver
- • International test configurations
- • Very short event dead zones (20cm) and attenuation dead zones (40cm)
- • Streamlined user interface and error-free set-up
- • FastReport on-board PDF report generation
VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units. Combined with a VIAVI Fuel Quantity Test Set, the test solution provides complete functional testing and troubleshooting of the fuel quantity system. If you are unable to find your aircraft listed here, we also offer design services for the development of new interfaces and aircraft test procedures.
Available through your GSA Supplier
- • MK XIIA AIMS certified for Level 1 and Level 2
- • Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
- • Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
- • Separate connections for direct or over-the-air testing
- • Software defined radio design allows waveform flexibility and future growth potential
- • Dual signal generator design allows coordinated signal production for interference and echo testing
- • Remote interfaces consist of RS-232, Ethernet and GPIB
- • GUI allows easy access to test features
- • Industry wide use in development and end item testing of transponders and interrogators
- • Fiber optic delay line based test set supports all formats of radio altimeters
- • Portable ruggedized enclosure for flight line or benchtop use
- • Battery operated
- • Simulates static altitudes from 5* ft. to 10,000 ft. in 5 ft. increments (*Minimum altitude dependent on interconnecting cables)
- • Extended Range Option: Simulate 16,000 ft and 25,000 ft as discrete altitude selections
- • +20 dB of power level offset from nominal loop loss value
- • Touch-screen operation
- • Direct-connect to UUT T/R or installed system via antenna couplers
- • Interrogator coupler mounts over the aircrafts’ four element interrogator antenna array
- • Transponder coupler mounts over top and bottom transponder antennas
- • Interrogator coupler kit supports all blocks of F-16 aircraft
- • Transponder coupler kit supports all F-16 blocks except F-16A/B, blocks 10/20
- • Interfaces with most IFF ramp test equipment
- • EMI gasketing eliminates stray transmissions and interference
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
