SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - IFF-45TSL MK XIIB and TACAN Bench Test Set
All features from the existing IFF-45TS will be carried over, including:
- • Mode 5 testing without actual cryptographic applique and keys using integral mode 5 emulator
- • Supports DoD AIMS 04-900A Option A - KIV-78 and QRTK6 NG (with Airbus DS QRTK6 NG adapter) and Option B - KIV-77 and SIT-2010 crypto appliqués, KIV-79
- • Separate connections for direct or over-the-air testing
- • Test ranges of up to 3 km with appropriate antennas
- • ADS-B Out
- • Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators
A next-generation RF signal generator/receiver designed for engineering design, certification, manufacturing, and return-to-service applications.
The IFF-45TSL test set provides RF signal generation and parametric measurement of MK XIIB and TACAN equipment. Replies and interrogations can be individually configured to support MK XIIB testing requirements. ADS-B Out testing monitors ADS-B, TIS-B, ADS-R, and acquisition squitters. The IFF-45TSL emulates either a TACAN ground transponder, or a TACAN airborne interrogator.
Key Features
- • New front panel LED Status Indicators (PWR, System, Crypto, TX/RX top and bottom, Direct vs. Antenna)
- • New Target Generator Instrument Option available (IFF-45TSL-STG)
- • Mode 5 Level 2 B “In” and ADS-B “In” available in the Target Generator Instrument
- • Support for 5 configurable transponder like static targets
- • Configurable fields include M3 Code, GPS position, GPS Altitude, etc. – these parameters will be used globally across all modes of the target
- • Supermode interrogations will be handled
- • Each target will have capability to:
- • Transmit squitters (DF17, DF18, ADS-B “In”, M5L2-B “In”)
- • Transmit real-time replies appropriate to the random interrogation received (Modes 1, 2, 3/A, C, S, 4 and 5)
- • Much improved processing capability (DSP, FPGA, Processor, Memory)
- • Improved transmitter On/Off ratio performance
- • Modernized RF circuitry (no tuning required and more stable)
- • AIMS 17-1000 certification
- • Mode 5 Level 2 B “Out”
- • Better support of Transponder Box Test (bench) for tests needing burst mode type tests (up to 101 interrogation sequence)
- • Better support of Interrogator Box Test (bench) by checking interrogator’s ability to handle all
- • Mode S reply types that can be programmed to operate using all II and SI codes transmitted in both all-call and roll-call interrogations
- • Better Interrogator Installation (ramp) test capability allowing for verification that the interrogator can be programmed to operate using all II and SI codes and that both sets of codes are transmitted in both all-call and roll-call interrogations
- • Ability to externally or internally trigger M5L2 reports on a 1:1 basis (test mode, non-conforming to AIMS)
- • Ability to increase the max squitter rate (ADS-B and M5L2) (current maximum of 2 Hz – test mode, non-conforming to AIMS)
- • Ability to modify a fourth Mode S preamble pulse positions/widths
- • Backward compatibility with legacy Remote-Control Interface (RS-232, Ethernet and GPIB) Improved GUI
- • Standard 2U enclosure (old unit was 2U+ which required 3U of space)
- • Improved cooling
EXPORT CONTROL
This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.
Applications
- • Engineering – Development and qualification testing for MK XIIA, ADS-B Beacon, and TACAN equipment
- • Manufacturing - Factory calibration and verification testing
- • Depot/Service - Level 1/2, return-to service testing
- • Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators
- • Industry-wide use for development and end item testing of transponders and interrogators
- • Support Fixed Waveform operation for Mode 5
More Product Information
- • Accommodates both phase and amplitude type antennas
- • Reliable, FAR Part 43, Appendix F, ERP and MTL testing in high multi-path environments
- • Provides >20 dB of isolation
- • Provides shielding for all transponder and ADS-B performance testing
- • Lower antenna adjustable support pole
- • Perform four-quadrant testing by simply rotating the bearing selector dial
- • TCAS bearing accuracy < 10 degrees
- • Provides >20 dB of antenna isolation
- • <1 dB repeatability
- • Supports GPS antennas up to 14 inches in diameter
- • Rugged design for ramp use
- • Tests FMCW radio altimeters including CDF types
- • Tests pulse radio altimeters (non-pulse compression types)
- • Direct-connect to UUT T/R or to installed system via antenna couplers
- • Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
- • Multi-channel operation (via additional test sets)
- • Programmable multi-leg climb/descend profiles
- • Large touch-screen display with simple user interface
- • Remote control interface USB/LAN
- • Lightweight and compact about 10 lbs. (4.5 kg)
- • Battery 4 hours plus duration
- • Legacy command set compatibility offered for the following products: NAV-2000R, ATN-7300 and the Collins 479S-6A
- • Ethernet remote control interface offered on the ATB-7300NG
- • VHF Generator - Provides control of modulation frequency, modulation depth (up to 3 sources), SELCAL tones, frequency and tone sequences.
- • ILS/Localizer Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, left/right DDM and IDENT settings, including Morse code.
- • ILS Glide Slope Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, up/down DDM
- • VOR Generator - Provides control of 30 Hz Var/Ref and 9960 Hz tone frequencies, modulation depths, 9960 Hz deviation, VOR bearing, to/from and IDENT settings
- • ADF Generator - Provides control of modulation frequency, modulation depth and IDENT settings
- • Marker/Beacon Generator - Provides selection of Outer, Middle and Inner marker beacon tones and control of tone frequencies, modulation depth and IDENT settings
- • Basic Graphical User Interface (GUI) allows access to test features
- • Uses a precise non-contact air-solvent-air sequence to blast and remove contamination particles
- • Comprehensive selection of precision cleaning tips for most fiber connector types
- • High performance air filter system
- • Hassle-free solvent management
- • Additional connections for foot activation pedal & backplane handset extension.
- • Repeatable Pass/Fail analysis eliminates subjective guesswork from the measurement process
- • User-selectable acceptance profiles allow certification to any acceptance criteria
- • Includes FiberChekPRO™ software for analysis and reporting with PC/laptop
- • Automatic Image Centering ensures the fiber in always on the center of the screen
- • Dual-Magnification switching allows easy toggling between low & high magnifications.in both live and analysis views
- • Easily connect to a T-BERD®/MTS-2000/4000/5800/6000A/8000v2, HST-3000, SMARTClassTM Fiber, Certifier40G, DSAM and CellAdvisor via USB without the need for any additional adapters or software.
- • Easily connect to mobile Android™ devices/tablets using FiberChekMOBILE (available at Google Play) to inspect endface quality, measure optical power, and certify fiber connectors to industry standards directly on the mobile device
- • Very short event dead zones (20cm) and attenuation dead zones (40cm)
- • Streamlined user interface and error-free set-up
- • FastReport on-board PDF report generation
- • VIAVI designed RF test system, fully integrated into the ATEC® Test System
- • Simple Ethernet interface between RFEM and ATEC® Test System permits easy retrofit to existing ATE installations
- • Powerful test executive interface offers many advantages to the test operator
- • Global service and support provided jointly by SPHEREA and VIAVI Solutions
- • Extensive CMM-listed TPS library in development or planned, covering Nav, Comm, TCAS, Transponder, GPS, and other RF systems
- • Complete RFEM and TPS information can be consulted on the SPHEREA Customer Support and Services MySpherea Internet web site
- • Our objective is to offer test coverage of RF products from all major OEMs
VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units. Combined with a VIAVI Fuel Quantity Test Set, the test solution provides complete functional testing and troubleshooting of the fuel quantity system. If you are unable to find your aircraft listed here, we also offer design services for the development of new interfaces and aircraft test procedures.
Available through your GSA Supplier
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
