SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - PSD90-1C AC/DC Fuel Capacitance Test Set
- • Easy to operate/calibrate
- • Annual calibration Lightweight / portable
- • Rechargeable battery or externally powered
- • Percent of battery capacity displayed
- • Self-test on power-up
- • Measures DC voltage Manual or Auto Ranging
- • 2 and 3 Wire Meggar
- • Compliant with Boeing Spec 10-61959 Rev H
- • MIL-STD-810 Method 511.4 certified
- • Traceable to NIST
- • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
Technologically advanced test set, providing multiple functions for calibration and troubleshooting
The PSD90-1C Universal AC/DC Capacitance Test Set will test any AC or DC Capacitive Fuel, Water, LOX or Engine Oil Quantity System*. The PSD90-1C has features that allow the user to better troubleshoot and isolate fuel system problems. Rugged in design, the unit can be used anywhere testing and troubleshooting is required. Capable of being operated with external power, the PSD90-1C is ideal for shop or Depot Level repair of fuel system components.
NSN: 4920-01-510-5628 Designed for F-16 fleet
NSN: 4920-01-528-2230 Designed for universal non-F16 fleet
*Aircraft-specific interface cables are required and must be purchased separately.
Available through your GSA supplier
Technical Specs
Size
- • 10.6” x 14” x 6.5” (26.9 cm x 35.6 cm x 16.5 cm)
- • 13 lbs
More Product Information
- • Uses a precise non-contact air-solvent-air sequence to blast and remove contamination particles
- • Comprehensive selection of precision cleaning tips for most fiber connector types
- • High performance air filter system
- • Hassle-free solvent management
- • Additional connections for foot activation pedal & backplane handset extension.
- • DoD AIMS 03-1000A (Change Notes 1,2,3) Mark XIIA certified
- • Supports DoD AIMS 04-900A Option A - KIV-78 and Option B - KIV-77, & SIT-2010 crypto appliqués.
- • Transponder Test Modes 1,2,3/A, C, S (EHS/ELS), 4, Mode 5 (Level 1 and 2
- • Interrogator Test Modes 1, 2, 3/A, C, S, 4, Mode 5, TCAS, ETCAS (Level 1 and 2)
- • DO-260B compliant; ADS-B Out test capability
- • Legacy command set compatibility offered for the following products: NAV-2000R, ATN-7300 and the Collins 479S-6A
- • Ethernet remote control interface offered on the ATB-7300NG
- • VHF Generator - Provides control of modulation frequency, modulation depth (up to 3 sources), SELCAL tones, frequency and tone sequences.
- • ILS/Localizer Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, left/right DDM and IDENT settings, including Morse code.
- • ILS Glide Slope Generator - Provides control of 90 Hz and 150 Hz tone frequencies, modulation depths, up/down DDM
- • VOR Generator - Provides control of 30 Hz Var/Ref and 9960 Hz tone frequencies, modulation depths, 9960 Hz deviation, VOR bearing, to/from and IDENT settings
- • ADF Generator - Provides control of modulation frequency, modulation depth and IDENT settings
- • Marker/Beacon Generator - Provides selection of Outer, Middle and Inner marker beacon tones and control of tone frequencies, modulation depth and IDENT settings
- • Basic Graphical User Interface (GUI) allows access to test features
- • MK XIIA AIMS certified for Level 1 and Level 2
- • Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
- • Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
- • Separate connections for direct or over-the-air testing
- • Software defined radio design allows waveform flexibility and future growth potential
- • Dual signal generator design allows coordinated signal production for interference and echo testing
- • Remote interfaces consist of RS-232, Ethernet and GPIB
- • GUI allows easy access to test features
- • Industry wide use in development and end item testing of transponders and interrogators
- • Provides >20 dB of antenna isolation
- • <1 dB repeatability
- • Supports GPS antennas up to 14 inches in diameter
- • Rugged design for ramp use
- • Integrated touch screen with live fiber viewing
- • Auto-Center
- • Auto-Focus
- • Built-in fiber endface analysis
- • User-selectable acceptance profiles
- • Stores results on device or export
- • WiFi and USB connection capabilities
- • System - Simulated 3D position may be user entered in latitude/longitude/height format or 3D position may be dynamically simulated utilizing a multi-leg waypoint entry scheme. An unlimited number of navigation plans may be saved and recalled under a user assigned name. A built-in GPS receiver allows positional simulation in the form of a range, heading and altitude based on current test set position.
- • Satellite Vehicle (SV) Selection - All GPSG-1000 configurations allow GPS and Galileo satellites to be mixed. (The Galileo codes may be updated via a text file upload.)
- • Waypoints - Waypoint legs join up in 3D space, with either range rate or altitude-rate being auto calculated. Trajectory changes are calculated to simulate real world navigation, i.e. waypoint leg heading changes utilize realistic rates of turn; altitude changes utilize realistic rates of descent or climb. Way points may be entered in LAT/LONG form or automatically recalled from an airport or city database.
- • SBAS - SBAS satellites WAAS/EGNOS may be manually selected or automatically based on simulated position.
- • Setup - The setup page allows system, user and RF connection parameters to be set by the user.
VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units. Combined with a VIAVI Fuel Quantity Test Set, the test solution provides complete functional testing and troubleshooting of the fuel quantity system.
- • PSD 737-2 FQIS - This interface measures the capacitance of the individual probes and compensator or total tank capacitance and also tests densitometers.
- • PSD 767-2 FQIS - This interface is a Honeywell FQIS at FQPU interface unit.
- • Accommodates both phase and amplitude type antennas
- • Reliable, FAR Part 43, Appendix F, ERP and MTL testing in high multi-path environments
- • Provides >20 dB of isolation
- • Provides shielding for all transponder and ADS-B performance testing
- • Lower antenna adjustable support pole
- • Perform four-quadrant testing by simply rotating the bearing selector dial
- • TCAS bearing accuracy < 10 degrees
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
