SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - GC-130 GPS Antenna Coupler Kit
- • Provides >20 dB of antenna isolation
- • <1 dB repeatability
- • Supports GPS antennas up to 14 inches in diameter
- • Rugged design for ramp use
The VIAVI GC-130 GPS Antenna Coupler provides >20 dB of antenna isolation, ensuring outside GPS signals are not seen by the aircraft’s GPS receiver when simulating a user defined GPS signal. The coupler mounts directly over the aircraft’s GPS antenna.
The GC-130 is designed for use with the VIAVI GPSG-1000 GPS Simulator when the supplied antenna coupler is too small to accommodate the GPS antenna of the system under test.
Benefits
- • Reliable GPS simulation in hangars and other low coverage areas
- • When used with the GPSG-1000 GPS Simulator:
- • Almanac and TOD update when no outside GPS signal is available
- • Sensitivity testing of the GPS system
- • Dynamic GPS simulation to simulate aircraft movement for testing of other aircraft systems
- • Determine latency of the GPS and transponder systems
Included in kit:
- • GC-130 GPS Antenna Coupler
- • Rigid transit case
- • Coax cable, 20 ft. TNC
More Product Information
- • Easy to operate/calibrate
- • Annual calibration Lightweight / portable
- • Rechargeable battery or externally powered
- • Percent of battery capacity displayed
- • Self-test on power-up
- • Measures DC voltage Manual or Auto Ranging
- • 2 and 3 Wire Meggar
- • Compliant with Boeing Spec 10-61959 Rev H
- • MIL-STD-810 Method 511.4 certified
- • Traceable to NIST
- • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
- • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
- • Modular design for high reliability and low maintenance
- • Closed box calibration using front panel controls - performed annually
- • Battery powered with percent of charge displayed
- • Maintenance codes displayed to aid in troubleshooting
- • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
- • Large selection of aircraft specific interface cables readily available
- • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
- • ADS-B Target Generator
- • ADS-B squitter encode/decode
- • DO-260, DO-260A and DO-260B data parsing
- • DO-260B canned tests available (option)
- • Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option)
- • UAT TX/RX capability (optional)
- • Pulse and frequency measurement
- • 10.4 inch touch screen LCD display for operator control of all test set capabilities
- • Remote controlled via GPIB or Ethernet
- • Two independent transmitters and receivers
- • TX/RX data logging capability
- • Full diversity testing capability
- • Data parsing in engineering units
- • Uses a precise non-contact air-solvent-air sequence to blast and remove contamination particles
- • Comprehensive selection of precision cleaning tips for most fiber connector types
- • High performance air filter system
- • Hassle-free solvent management
- • Additional connections for foot activation pedal & backplane handset extension.
- • Solid-state circuits and LCD backlit display for low power consumption and high reliability
- • Battery-powered for complete portability and ease of maintenance
- • Lightweight aluminum case has hinged compartment in lid for test lead storage
- • Small size permits testing in restricted spaces
- • Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
- • Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks
VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units. Combined with a VIAVI Fuel Quantity Test Set, the test solution provides complete functional testing and troubleshooting of the fuel quantity system.
- • PSD 737-2 FQIS - This interface measures the capacitance of the individual probes and compensator or total tank capacitance and also tests densitometers.
- • PSD 767-2 FQIS - This interface is a Honeywell FQIS at FQPU interface unit.
- • Modular architecture
- • Scalable from 2×2 up to 16×16
- • Freq Range: 380MHz to 3.85GHz
- • Low end extension down to 30MHz
- • High end extension up to 5.95GHz
- • Channel BW: 40MHz
- • Options 100, 200, 400, 600, 800, 1000 and 1200MHz
- • Doppler Shift: ± 4kHz
- • Options ± 12kHz and ± 1.95MHz
- • Delay 4msec
- • Option 2sec (40MHz) / 1sec (>40MHz)
- • Repeatable Pass/Fail analysis eliminates subjective guesswork from the measurement process
- • User-selectable acceptance profiles allow certification to any acceptance criteria
- • Includes FiberChekPRO™ software for analysis and reporting with PC/laptop
- • Automatic Image Centering ensures the fiber in always on the center of the screen
- • Dual-Magnification switching allows easy toggling between low & high magnifications.in both live and analysis views
- • Easily connect to a T-BERD®/MTS-2000/4000/5800/6000A/8000v2, HST-3000, SMARTClassTM Fiber, Certifier40G, DSAM and CellAdvisor via USB without the need for any additional adapters or software.
- • Easily connect to mobile Android™ devices/tablets using FiberChekMOBILE (available at Google Play) to inspect endface quality, measure optical power, and certify fiber connectors to industry standards directly on the mobile device
• Global Avionics Test Set Support
• Fully Self-Contained
• Static and Dynamic simulations
• Automated Almanac upload process
• 18-channel configuration
• Real-time Transcoding
• Remote control interface via mobile application for both iOS and Android devices
• Single or Dual Coupler Configurations
• GPS signals simulated: L1
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
