SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - PSD60-2R AC Fuel Capacitance Test Set
- • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
- • Modular design for high reliability and low maintenance
- • Closed box calibration using front panel controls - performed annually
- • Battery powered with percent of charge displayed
- • Maintenance codes displayed to aid in troubleshooting
- • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
- • Large selection of aircraft specific interface cables readily available
The PSD60-2R Fuel Quantity Test Set is an accurate, stable unit designed to test AC capacitance type fuel quantity measurement systems and their line replaceable components. The PSD60-2R, along with aircraft-specific interface units or cables*, provides complete capability to test most aircraft with AC capacitance systems.
The PSD60-2R performs these functions
- • Measurement of total tank capacitance, individual tank units and compensators
- • Simulation of capacitance for indicator calibration
- • Simulation of compensator capacitance value for dry calibration
- • Measurement of the insulation resistance of tank units and aircraft harness
- • Measurement of coax center conductor to shield for fault isolation
- • Display of capacitance resolution to 0.00 pF for accurate individual tank unit test¬ing (to 199.99 pF)
*Aircraft-specific interface cables are required and must be purchased separately.
Available through your GSA supplier
Technical Specs
- • Weight 12 lbs (5.4 kg)
- • Width 14 in (35.6 cm)
- • Height 6.5 in (16.5 cm)
- • Depth 10.6 in (26.9 cm)
- • Power 27 V, 150 mA maximum
More Product Information
- • Uses a precise non-contact air-solvent-air sequence to blast and remove contamination particles
- • Comprehensive selection of precision cleaning tips for most fiber connector types
- • High performance air filter system
- • Hassle-free solvent management
- • Additional connections for foot activation pedal & backplane handset extension.
- • Tests FMCW radio altimeters including CDF types
- • Tests pulse radio altimeters (non-pulse compression types)
- • Direct-connect to UUT T/R or to installed system via antenna couplers
- • Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
- • Multi-channel operation (via additional test sets)
- • Programmable multi-leg climb/descend profiles
- • Large touch-screen display with simple user interface
- • Remote control interface USB/LAN
- • Lightweight and compact about 10 lbs. (4.5 kg)
- • Battery 4 hours plus duration
- NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
- NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
- • Interrogator coupler mounts over the aircrafts’ four element interrogator antenna array
- • Transponder coupler mounts over top and bottom transponder antennas
- • Interrogator coupler kit supports all blocks of F-16 aircraft
- • Transponder coupler kit supports all F-16 blocks except F-16A/B, blocks 10/20
- • Interfaces with most IFF ramp test equipment
- • EMI gasketing eliminates stray transmissions and interference
- • Safe and precise measurement and simulation
- • Contaminated Probe Detection
- • Low Voltage / Low Current Mode - Isolates corroded connections.
- • Distance-to-Fault Measurement
- • Self-test on power up
- • Closed box calibration
- • DoD AIMS 03-1000A (Change Notes 1,2,3) Mark XIIA certified
- • Supports DoD AIMS 04-900A Option A - KIV-78 and Option B - KIV-77, & SIT-2010 crypto appliqués.
- • Transponder Test Modes 1,2,3/A, C, S (EHS/ELS), 4, Mode 5 (Level 1 and 2
- • Interrogator Test Modes 1, 2, 3/A, C, S, 4, Mode 5, TCAS, ETCAS (Level 1 and 2)
- • DO-260B compliant; ADS-B Out test capability
- • Wide bandwidth, massive recording memory depth with contiguous and sequential recording and playback modes
- • Capable of more than three hours of streaming capture or play back at full instantaneous bandwidth (IBW) (max IBW is 200 MHz) at any center frequency between 100 kHz to 6 GHz or 30 GHz, depending on optional hardware configurations.
- • Capture, playback, and analyze the electromagnetic spectrum (EMS), including both military radars and 5G signals.
- • Ranger’s open industry standard based modular construction supports single or multiple channels in a single 6U chassis, as well as optional high-speed memory depths for recording and playback.
- • Frequency Range
- • VSG: 100 kHz to 6 GHz
- • VSA: 100 kHz to 6 GHz, 100 kHz to 30 GHz (based on hardware configuration)
- • Instantaneous Bandwidth (IBW) up to 200 MHz (250M samples / sec)
- • Signal WorkShop™ Signal Analysis Suite is integrated in all Ranger systems; provides extensive frequency-selective modulation-domain analysis tools to help users pinpoint and isolate signals and identify the cause of RF issues.
- • Compact design, 4U x 19” rack-mountable chassis
- • Rugged construction, 30 G Shock, MIL-28800 Class 3
- • Modular design to adapt to ever-changing needs and allow for system sanitization
VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units. Combined with a VIAVI Fuel Quantity Test Set, the test solution provides complete functional testing and troubleshooting of the fuel quantity system. If you are unable to find your aircraft listed here, we also offer design services for the development of new interfaces and aircraft test procedures.
Available through your GSA Supplier
- • Very short event dead zones (20cm) and attenuation dead zones (40cm)
- • Streamlined user interface and error-free set-up
- • FastReport on-board PDF report generation
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
