SBA-Certified | Woman-Owned | Cherokee Nation Citizen | Est. 2008
VIAVI - IFR6015 Military Flight Line Test Set
- • IFF Modes 1 & 2
- • TACAN/DME interrogator testing
- • Military E-TCAS
- • Transponder Auto Test (DO-181E)
- • Automated ADS-B AC 20-165B surface/air performance testing
- • ADS-B (Out) monitor and decode
- • ADS-B (In) target generation
- • UUT parametric tests
- • User programmable TCAS scenarios
- • Altitude encoder
- • Over-the-air, direct, or coupled testing
- • Battery operation for 6 hours plus
VIAVI IFR6015 Military Flight Line handheld Test Set is a user-friendly flight line test set that allows for fast, reliable, and functional testing of military transponder, TCAS and TACAN installed systems. Referenced in many OEM manuals and supported with procedures, the IFR6015 provides the operator with the confidence necessary for system performance testing.
Benefits
- • TACAN ground station simulation
- • Legacy TACAN test set emulation
- • Provides a full FAR Part 43, Appendix F test
- • Verify ADS-B /UAT installed systems
- • With the optional antenna coupler, avoid ATC interference and the need for frequency allocation approval (DD 1494)
- • Performs TACAN/DME testing Ground-to-Air (G/A), Air-to-Air (A/A)
- • Simulate ATCRBS or Mode S intruders for TCAS testing
|
Standard Accessories |
|
|---|---|
| 10241 | Transit case |
| 62302 | Power cord, 110V |
| 64020 | Power cord set, 220V |
| 62401 | TNC/TNC Coax. 12 in. |
| 112830 | TNC/TNC Coax. 72 in. |
| 56080 | Fuse, 5 Amp. 32V |
| 112684 | Antenna |
| 64749 | Antenna shield |
| 64580 | Breakout box |
| 67366 | Power supply |
| 6100 | Getting Started Manual |
| 6097 | Operation Manual - CD (AC0825CD) |
More Product Information
• Global Avionics Test Set Support
• Fully Self-Contained
• Static and Dynamic simulations
• Automated Almanac upload process
• 18-channel configuration
• Real-time Transcoding
• Remote control interface via mobile application for both iOS and Android devices
• Single or Dual Coupler Configurations
• GPS signals simulated: L1
- • Configurable test capability
- • Intuitive user interface
- • Software defined applications
- • Remote operation
- • Android™ and iOS® compatible
- • Guided test for Navigation applications
- • Built-in GPS Receiver
- • International test configurations
- • IFF Modes 1 & 2
- • TACAN/DME interrogator testing
- • Military E-TCAS
- • Transponder Auto Test (DO-181E)
- • Automated ADS-B AC 20-165B surface/air performance testing
- • ADS-B (Out) monitor and decode
- • ADS-B (In) target generation
- • UUT parametric tests
- • User programmable TCAS scenarios
- • Altitude encoder
- • Over-the-air, direct, or coupled testing
- • Battery operation for 6 hours plus
- • System - Simulated 3D position may be user entered in latitude/longitude/height format or 3D position may be dynamically simulated utilizing a multi-leg waypoint entry scheme. An unlimited number of navigation plans may be saved and recalled under a user assigned name. A built-in GPS receiver allows positional simulation in the form of a range, heading and altitude based on current test set position.
- • Satellite Vehicle (SV) Selection - All GPSG-1000 configurations allow GPS and Galileo satellites to be mixed. (The Galileo codes may be updated via a text file upload.)
- • Waypoints - Waypoint legs join up in 3D space, with either range rate or altitude-rate being auto calculated. Trajectory changes are calculated to simulate real world navigation, i.e. waypoint leg heading changes utilize realistic rates of turn; altitude changes utilize realistic rates of descent or climb. Way points may be entered in LAT/LONG form or automatically recalled from an airport or city database.
- • SBAS - SBAS satellites WAAS/EGNOS may be manually selected or automatically based on simulated position.
- • Setup - The setup page allows system, user and RF connection parameters to be set by the user.
- • Very short event dead zones (20cm) and attenuation dead zones (40cm)
- • Streamlined user interface and error-free set-up
- • FastReport on-board PDF report generation
• Two independent receivers and two transmitters in each unit.
• Transmit and receive frequency range of 1 MHz to 18 GHz.
• Up to 400 MHz instantaneous signal bandwidth on each transmitter and receiver.
• Each receiver is independently programmable in frequency, gain, and bandwidth.
• Each transmitter is independently programmable in frequency, power, and signal waveform.
• Large waveform storage capacity for full bandwidth recording and playback.
• Quick setup and configuration, operational in a matter of minutes.
• Compatible with standard universal AC power, vehicle power, and battery power.
• BB2590 battery operation for extended field use.
• Compatible with Ranger Signal WorkShop™ waveform files.
• Compatible with Ranger EMS Sequencer (Vignette Planning & Execution) software.
• Mobile phone, tablet, or PC operation via network connection.
• Modular hardware structure for customizable configurations.
• Software Communications Architecture (SCA) framework for rapid deployment of new features and applications.
• Open modular architecture for easy integration into various platforms and systems
- • VIAVI designed RF test system, fully integrated into the ATEC® Test System
- • Simple Ethernet interface between RFEM and ATEC® Test System permits easy retrofit to existing ATE installations
- • Powerful test executive interface offers many advantages to the test operator
- • Global service and support provided jointly by SPHEREA and VIAVI Solutions
- • Extensive CMM-listed TPS library in development or planned, covering Nav, Comm, TCAS, Transponder, GPS, and other RF systems
- • Complete RFEM and TPS information can be consulted on the SPHEREA Customer Support and Services MySpherea Internet web site
- • Our objective is to offer test coverage of RF products from all major OEMs
- • Integrated touch screen with live fiber viewing
- • Auto-Center
- • Auto-Focus
- • Built-in fiber endface analysis
- • User-selectable acceptance profiles
- • Stores results on device or export
- • WiFi and USB connection capabilities
- • Accommodates both phase and amplitude type antennas
- • Reliable, FAR Part 43, Appendix F, ERP and MTL testing in high multi-path environments
- • Provides >20 dB of isolation
- • Provides shielding for all transponder and ADS-B performance testing
- • Lower antenna adjustable support pole
- • Perform four-quadrant testing by simply rotating the bearing selector dial
- • TCAS bearing accuracy < 10 degrees
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Test, Measurement, Simulation and Emulation
Download Line Card
Document
