Overview
NEO 905 5080 PSI HYDRAULIC CAP
Specifications & Details
|
PART NUMBER |
PORT SIZE |
THREAD END PER AS8879 |
|
NEO 905F-P-04 |
4 |
0.4375-28 UNJEF Class 3B |
|
NEO 905F-P-06 |
6 |
0.5625-24 UNJEF Class 3B |
| NEO 905F-P-08 |
8 |
0.7500-20 UNJEF Class 3B |
|
NEO 905F-P-10 |
10 |
0.8750-20 UNJEF Class 3B |
| NEO 905F-P-12 |
12 |
1.0625-18 UNJEF Class 3B |
|
NEO 905F-P-16 |
16 |
1.3125-16 UNJ Class 3B |
|
NEO 905F-P-20 |
20 |
1.6250-16 UNJ Class 3B |
*All threaded surfaces are treated with tungsten disulfide dry lubricant
*Approximate Dimensions [inches]
*Optional orange paint stripe and 12 “Lanyard with attached “REMOVE BEFORE FLIGHT’ flag available
Datasheets & Downloads
Videos
More Product Information
Related Products
-
NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
-
NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
The VIAVI TestCenter SPT-N4U is a compact 4RU, two-slot modular chassis for scalable 10G through 400G Ethernet testing, supporting up to 2.4 Tbps of test traffic and 96 Ethernet test ports.
- Compact, 19-inch rack-compatible 4RU chassis with two test-module slots
- Scales to 2.4 terabits of test traffic per second
- Supports up to 96 × 10G/25G, 48 × 50G, 24 × 40G/100G, 8 × 200G, or 4 × 400G Ethernet ports
- Supports up to 32 simultaneous users with IPv4- and IPv6-compatible administration
- Provides precision timing, native IEEE 1588v2 PTP support, automatic chassis synchronization, and touchscreen administration
*Compatibility note: The FX3-QSFP28-6 test module is not supported in this chassis
• Two independent receivers and two transmitters in each unit.
• Transmit and receive frequency range of 1 MHz to 18 GHz.
• Up to 400 MHz instantaneous signal bandwidth on each transmitter and receiver.
• Each receiver is independently programmable in frequency, gain, and bandwidth.
• Each transmitter is independently programmable in frequency, power, and signal waveform.
• Large waveform storage capacity for full bandwidth recording and playback.
• Quick setup and configuration, operational in a matter of minutes.
• Compatible with standard universal AC power, vehicle power, and battery power.
• BB2590 battery operation for extended field use.
• Compatible with Ranger Signal WorkShop™ waveform files.
• Compatible with Ranger EMS Sequencer (Vignette Planning & Execution) software.
• Mobile phone, tablet, or PC operation via network connection.
• Modular hardware structure for customizable configurations.
• Software Communications Architecture (SCA) framework for rapid deployment of new features and applications.
• Open modular architecture for easy integration into various platforms and systems
- Wide bandwidth, massive recording memory depth with contiguous and sequential recording and playback modes
- Capable of more than three hours of streaming capture or play back at full instantaneous bandwidth (IBW) (max IBW is 200 MHz) at any center frequency between 100 kHz to 6 GHz or 30 GHz, depending on optional hardware configurations.
- Capture, playback, and analyze the electromagnetic spectrum (EMS), including both military radars and 5G signals.
- Ranger’s open industry standard based modular construction supports single or multiple channels in a single 6U chassis, as well as optional high-speed memory depths for recording and playback.
- Frequency Range
- VSG: 100 kHz to 6 GHz
- VSA: 100 kHz to 6 GHz, 100 kHz to 30 GHz (based on hardware configuration)
- Instantaneous Bandwidth (IBW) up to 200 MHz (250M samples / sec)
- Signal WorkShop™ Signal Analysis Suite is integrated in all Ranger systems; provides extensive frequency-selective modulation-domain analysis tools to help users pinpoint and isolate signals and identify the cause of RF issues.
- Compact design, 4U x 19” rack-mountable chassis
- Rugged construction, 30 G Shock, MIL-28800 Class 3
- Modular design to adapt to ever-changing needs and allow for system sanitization
Manufacturer
Dualos
Dualos supplies the avionics industry with most reliable, precision manufactured hydraulic interface components in the market.
With the quality and assurance that’s expected Dualos partners with major avionics manufacturers to solve complex engineering and test challenges. A lack of commercially available hydraulic test adapters was the problem. This opportunity laid the foundation in forming Dualos’ Hydraulic Interface Components division a decade ago.
Dualos designs, manufactures and provides logistical support for an entire family of Hydraulic Interface Components.
🛠️ Precision Hydraulic Interfaces
Product Types
Applications
